Still EXG-10, Оригинальное руководство пользователя, Страница: 80 / 152

4
Use
Putting Out of Commission and Storage
Putting Out of Commission and Storage
Parking the truck.
WARNING
Do not park the truck on a slope, or if this is absolu-
tely necessary, make sure it is safely secured using
chocks.
Never leave the truck with the load in the raised
position.
Parking the truck.
– Lower the fork arms.
– Remove the ignition key or press the
digicode
#
key for 2 seconds.
– Press the emergency off switch.
Restarting work
– Pull the emergency off switch.
– Put the key back in the ignition or enter the
5-digit code on the digicode (default code:
00000).
Long-term truck storage
The following work must be carried out on
the truck to prevent corrosion if it needs to be
stored for a long period of time. If the truck is to
be stored for more than two months, it must be
positioned in a clean and dry area. The area
must be well-ventilated with no risk of freezing.
Work prior to storage
– Clean the truck thoroughly.
– Check the hydraulic oil level and refill if
necessary.
– Coat any unpainted metal parts with a thin
layer of oil or grease.
– Grease all hinges and joints.
– Check battery condition and electrolyte
density. Maintain the battery in accordance
with the manufacturer’s requirements.
(Follow the instructions).
– Spray contacts with an aerosol product
designed for contacts.
– Raise and chock the truck so that the wheels
do not touch the ground, in order to prevent
irreversible deformation of the tyres.
– Cover the truck with a cotton cover to protect
it from dust.
CAUTION
We recommend that you do not use a plastic sheet
as this encourages condensation to form.
Consult the service department for further
measures to take if the truck must be stored
for a longer period of time.
74 1170 801 15 09 [EN]