Still EXG-10 Скачать руководство пользователя страница 22

Страница: 22 / 152

Safety

Deﬁnition of responsible persons

Operating company

The operating company is the natural or legal

person or group who operates the truck or on

whose authority the truck is used.
The operating company must ensure that the

truck is only used for its intended purpose and

in compliance with the safety guidelines set

out in these operating instructions.

The operating company must ensure that

all users read and understand the safety

information in these instructions.
The operating company is responsible for the

scheduling and correct performance of regular

safety checks.
It is recommended that these checks comply

with national performance speciﬁcations.

Specialist

A specialist is deemed to be:
• A person whose experience and technical

training has allowed him to develop relevant

knowledge of industrial trucks

• A person who is also familiar with national

health and safety regulations and gener-

ally recognised technical directives and

conventions (standards, VDE regulations,

technical regulations of other European

Union member states or countries that are

signatories to the treaty that established the

European Economic Area). This expertise

allows him to assess the condition of indus-

trial trucks in terms of health and safety

Drivers

This truck may only be driven by suitable

persons who are at least 18 years of age, have

been trained in driving, have demonstrated

their skills in driving and handling loads, and

have been speciﬁcally designated to drive the

truck. Speciﬁc knowledge of the truck is also

necessary.

Driver rights,duties and rules of be-

haviour

The driver must be duly informed of his rights

and duties.
The driver must be granted the required rights.
The driver must wear protective equipment

(protection suit, safety helmet, industrial gog-

gles and protective gloves) that is appropriate

for the conditions, the task and the load to

be lifted. The driver must also wear safety

footwear to be able to drive and brake in com-

plete safety.

The driver must be familiar with the operating

instructions and have access to them at all

times.
The driver must:
• Have read and understood the operating

instructions

• Have familiarised himself with safe opera-

tion of the truck

• Be physically and mentally able to drive the

truck safely

DANGER

The use of drugs, alcohol or medications that affect

reactions impair the ability to drive the truck.
Individuals under the inﬂuence of the above-men-

tioned substances are not permitted to perform

work of any kind on or with the truck.

1170 801 15 09 [EN]

Содержание EXG-10

























































































































































Результаты поиска

Содержание EXG-10

Отзывы:

Бренды по названию

Популярные бренды

Still EXG-10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXG-10

Отзывы:

Бренды по названию

Популярные бренды