Still EXG-10 Скачать руководство пользователя страница 73

Страница: 73 / 152

Use

Handling the truck in speciﬁc situations

WARNING

Risk of serious injury and/or serious damage to

equipment.
Always immobilise and chock the machine after

lifting it.

Towing

CAUTION

Deterioration or destruction of the equipment
The brake is applied if there is no power supply to

the truck from the battery; in this case the machine

can only be moved with the front raised and with

extreme caution.

CAUTION

Deterioration or destruction of the equipment.
Do not tow the truck by the control unit.

CAUTION

Deterioration or destruction of the equipment.
Unload the truck before towing it.

Removing the mast

WARNING

Only use slings and a hoist of sufﬁcient capacity.

Protect all parts coming into contact with the lifting

device. Attach the lifting device as illustrated.
This work falls exclusively within the competence of

network personnel.

Transporting the machine

If the truck has to be transported, please en-

sure that it is properly chocked and protected

against bad weather.

1170 801 15 09 [EN]

Содержание EXG-10

























































































































































Результаты поиска

Содержание EXG-10

Отзывы:

Бренды по названию

Популярные бренды

Still EXG-10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXG-10

Отзывы:

Бренды по названию

Популярные бренды