Still EXG-10 Скачать руководство пользователя страница 55

Страница: 55 / 152

Use

Lifting

Use of the mast

WARNING

Only use the lifting device and the accessories for

the work for which they are intended. The operator

must receive instruction on the operation of the

lifting mechanism.

WARNING

Never put your hands near the lifting mechanism.

DANGER

The mast protective screen must always be in

place, correctly ﬁxed and clean to provide good

visibility.

Elevation control

Raising the mast:
• Turn the switch key.
• Pull control ﬂap (1) upwards.
Lowering the mast:
• Push control ﬂap (1) downwards.
When releasing the control ﬂap (1), the mast

stabilises at the required height.

NOTE

The speed of lifting and lowering movements

is determined by the degree to which the

proportional control (1) is moved. This ﬂap

automatically returns to the neutral position

when it is released.

CAUTION

Always use this control (1) gently without jerking.

1170 801 15 09 [EN]

Содержание EXG-10

























































































































































Результаты поиска

Содержание EXG-10

Отзывы:

Похожие инструкции для EXG-10

Бренды по названию

Популярные бренды

Still EXG-10, Оригинальное руководство пользователя

Результаты поиска

Содержание EXG-10

Отзывы:

Похожие инструкции для EXG-10

Бренды по названию

Популярные бренды