Still EXD-SF 20, Оригинальное руководство пользователя

Страница: 97 / 150

Use
4
Handling the battery
On-board charger
Precautions for installation and use
The on-board charger means you no longer
have to use a charging room. This charger
can be connected to any 2P+T 230 V 16 A
socket. However, before charging this way,
the user must ensure that the location selected
for charging satisfies all the required safety
guarantees:
• The electrical system must comply with
standard NF C 15 100.
• The electric wall socket must be a 2 pole
+ earth 16 A 230 V type that is correctly
connected and protected.
• Before charging, check the condition of
the connections and cables (retighten, as
required).
• Charging must be carried out in an area
where there is no condensation or pollution
and there must be sufficient ventilation.
• The charger must not be exposed to oil,
grease or other similar substances.
• Charging must be carried out with the truck
stopped.
• The increase in the temperature of the unit
in relation to the ambient temperature is
10°C maximum. The temperature of the
expelled air is 25°C maximum. Wait 10
minutes after stopping the charger before
touching the unit.
• As the charger is cooled by forced ventila-
tion, do not block the air inlets and outlets.
There must be sufficient air circulation to
the outside.
The charger is designed:
• To be incorporated inside an industrial
truck. The charger must never be used
alone (out of the truck).
• To stay permanently connected to the
battery.
• To operate in all positions.
• Remain connected to the mains during
periods of truck downtime to ensure the
availability of the machine.
• To tolerate "opportunity charging".
CAUTION
Risk of damage to the mains cable resulting in
electric shock and/or burns.
Park the truck very close to the wall-mounted mains
socket to avoid tensioning the charger's mains
cable during charging.
Electrical specifications of the charger
Mains voltage
190 V < U < 260 V
Network frequency
50 / 60 Hz
+/-1% (automatic
adaptation)
No inrush current to
the mains connection
Maximum output
power
1040 W +/-3%
Maximum output
current
35 A +/-2%
Nominal battery
voltage
24 V
Tolerance on the
voltage of bearing
U
1%
.
Electrical safety
• Protection against reversal of battery po-
larity: the charger is protected by an output
relay. After the battery is reconnected in the
right direction, the charger starts charging
without requiring human intervention.
• Mains protection: by a 250 V 10 A 5x20
timed fuse. The mains fuse is fitted directly
to the electronic card. The user is not
authorised to change this fuse. If this fuse is
faulty, the charger must be returned to the
service centre.
Other charging characteristics
Maintenance charges
11638011651 EN - 09/2019 87