Still EXD-SF 20, Оригинальное руководство пользователя

Страница: 83 / 150

Use
4
Transporting loads
Picking up a load from the ground
– Use the initial lift to raise a load of up to
2000 kg several centimetres from the
ground.
Transporting a load
DANGER
Risk of accident
No one should be under or near the truck when the
load is in the raised position.
DANGER
Risk of falling
Never transport a load with the forks in the raised
position as the truck may become unstable.
Observe the following recommendations:
• Always drive forwards for optimum visibility
• Always travel up or down slopes with the
load uphill Never travel across the slope or
make a U-turn
• Reverse travel is used for depositing
the load As visibility in reverse travel is
restricted, drive at creep speed
• Never drive with an unstable load
• If visibility is poor, let someone guide you
• Be careful of low passageways, low door-
ways, scaffolding, pipes etc.
• To move past obstacles, slightly raise the
forks
• Check that the width of the load is not
greater than the width of the aisle
Setting a load down on the ground
Proceed as follows:
– Drive the machine to the required location.
– Carefully move the load into the unloading
area.
– Lower the load until the forks are freed.
– Withdraw the machine in a straight line.
– Raise the forks a few centimetres.
11638011651 EN - 09/2019 73