Still EXD-SF 20 Скачать руководство пользователя страница 20

Страница: 20 / 150

Safety

Safety regulations

These operating instructions, which come

with the truck, must be communicated to all

those concerned and in particular to personnel

responsible for maintenance and driving.

The employer must make sure that the forklift

operator has properly understood all the safety

information.
Please observe the directives and safety

regulations attached, in particular:
• Information concerning the use of materials

handling trucks

• Regulations concerning trafﬁc lanes and

working areas

• Appropriate behaviour, rights and responsi-

bilities of the driver

• Use in particular areas
• Information about the weight and dimen-

sions of pallets or any other container

• Information concerning starting, driving and

braking

• Information concerning maintenance and

repair

• Regular checks and technical inspections
• Recycling of lubricants, oils and batteries
• Residual risks.
Care is recommended both for the user and

the person in charge (employer) with regard to

adhering to all safety rules concerning the use

of material-handling trucks.
When instructing forklift operators, we recom-

mend the following points are emphasized:
• The features of the truck
• The special accessories
• The speciﬁc features of the working envi-

ronment.

Train the user in how to drive the truck, until it

is under proper control.
Then, and only then, proceed to transferring

pallets.
Forklift truck stability is guaranteed when the

unit is used correctly.

11638011651 EN - 09/2019

Содержание EXD-SF 20























































































































































Результаты поиска

Содержание EXD-SF 20

Отзывы:

Похожие инструкции для EXD-SF 20

Бренды по названию

Популярные бренды

Still EXD-SF 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD-SF 20

Отзывы:

Похожие инструкции для EXD-SF 20

Бренды по названию

Популярные бренды