Still ECU-SF-20 Скачать руководство пользователя страница 60

Страница: 60 / 92

Maintenance

General Information

To keep your forklift in good condition, carry

out the servicing indicated regularly, within the

times indicated and using the consumption

materials provided for that purpose, as speci-

ﬁed on the following pages. Please make sure

that you keep a record of work done; this is the

only way for the guarantee to remain valid.
Maintenance is divided into:
• scheduled (to be done by the service

network authorised by the manufacturer)

• as required (done by the user)

DANGER

Scheduled maintenance and repairs must be

done by the service network authorised by the

manufacturer in order to maintain the machine

in perfect condition and compliant with technical

speciﬁcations.

NOTE

Contact the authorised service network for

a maintenance contract appropriate to your

forklift.

CAUTION

When the forklift is used in dusty environments, at

below zero temperatures and for especially heavy

uses, it is necessary to reduce the interval between

the various scheduled maintenance operations.

Operations Preliminary to Maintenance

Do the following before performing mainte-

nance operations:
• Place the truck on a ﬂat surface and make

sure that it cannot move accidentally.

• Lower the forks fully.
• Switch off the vehicle.
• Press the emergency stop button.

DANGER

Before performing any intervention on the electric

system, disconnect the battery outlet from the

relative plug.

Scheduled Maintenance

Synoptic Table of Maintenance Operations

Operations

Intervals in hours

Com-

pleted

1000 2000

3000

Clean the electric motors
Check motor commutators
Check the condition of the piping
Check hydraulic system oil level

Check reducer oil level
Check bushes, rollers and levers

45378043402 [EN]

Содержание ECU-SF-20





























































































Результаты поиска

Содержание ECU-SF-20

Отзывы:

Still ECU-SF-20, Оригинальное руководство пользователя, Страница: 60 / 92

Результаты поиска

Содержание ECU-SF-20

Отзывы: