Still ECU-SF-20, Оригинальное руководство пользователя, Страница: 44 / 92

4
Use and Operation
Breaking-In
DANGER
Use a crane with a suitable lifting capacity for the
weight of the truck, indicated on its data plate. Also
take into account the weight of the battery fitted (if
applicable), referring to the relevant identification
plate. The lifting operations must be performed
by qualified personnel. DO NOT stand within the
crane’s radius of action or near the truck. Use
NON METALLIC slings. Make sure that the lifting
capacity of the slings is suitable for the weight of the
truck.
• Screw the eyebolt (1), suitably sized, into
the appropriate seat indicated by the plate
(2).
– Feed a sling of sufficient capacity for the
weight of the truck through the eyebolt (2)
and hook it up to the crane hook.
DANGER
The slings should have a suitable length so as to
not graze the casing or any additional equipment
during lifting. Use a lifting beam if necessary. The
slings must be pulled vertically.
DANGER
It is prohibited to use any other method for lifting
and transporting the truck.
Do not stand in the danger area beneath suspended
loads.
Breaking-In
This type of forklift does not require special
breaking-in operations.
Checks and Inspections
Daily checks before use
The following checks must be performed on a
daily basis in order to keep your truck in good
condition and to operate safely. These checks
supplement and do not replace the scheduled
maintenance operations.
• Visually check that the various parts of the
truck are in good condition and correctly
positioned;
• Check that the fork arms are in good
condition;
• Make sure that the anti-crush safety push-
button works correctly;
• Check that the buttons and throttle/s on the
tiller are working correctly;
• Make sure that the buttons and throttle
automatically return to their correct position
after release;
• Check that the battery plug/outlet is posi-
tioned correctly and intact;
• Check that the wheels (traction, load) are in
good condition;
• Make sure that the warning horn works
correctly;
• Make sure that the start/stop key works
correctly;
• Check that the truck brakes and stops when
the throttle is released;
• Check that the truck brakes and stops when
the tiller is released;
• Make sure that the electromagnetic brake
works effectively;
• Check that the covers are fastened cor-
rectly;
• Check the automatic return of the tiller to
the vertical position with relative emergency
braking;
• Check that the emergency stop button
works correctly;
38 45378043402 [EN]