Still ECU-SF-20 Скачать руководство пользователя страница 18

Страница: 18 / 92

Safety

Safety Regulations

Oils

• Do not allow to come into contact with the

skin.

• Do not inhale oil vapors.
• Wear appropriate means of individual

protection during forklift maintenance

operations (gloves, goggles, etc.) to

prevent the oil from coming into contact

with your skin.

ENVIRONMENT NOTE

The used oils (brake, motor, transmission,

gearbox and hydraulic oil) and relative ﬁlters

contain substances hazardous to the environ-

ment and must be disposed of according to

current regulations. We advise you to contact

the authorised service network.

DANGER

The penetration in the skin of hydraulic oil that has

leaked under pressure from the forklift’s hydraulic

system is dangerous. If this type of lesion should

occur, contact a doctor immediately.

DANGER

Small high pressure jets of oil can penetrate the

skin. Look for any leaks using a piece of cardboard.

Battery Acid

• Do not inhale the vapor: it is poisonous.
• Use adequate means of individual protec-

tion to prevent contact with the skin.

• Battery acid is corrosive: if it should come

into contact with your skin, rinse abundantly

with water.

• Explosive gas mixtures can form when

charging the battery; therefore, the rooms

in which the battery is charged must be in

compliance with the speciﬁc regulations on

the subject (e.g. EN 50272-3 etc.).

• DO NOT smoke or use open ﬂames and

lights within a 2 m radius from the charged

battery and in the battery charging area.

NOTE

For greater information, consult the speciﬁc

battery manual that comes with the battery.

ENVIRONMENT NOTE

The batteries contain substances that are ha-

zardous to the environment. The replacement

and disposal of the life-expired battery must

be carried out as required by law. We advise

you to contact the authorised service network

that is equipped for eco-friendly disposal in

accordance with current regulations.

45378043402 [EN]

Содержание ECU-SF-20





























































































Результаты поиска

Содержание ECU-SF-20

Отзывы:

Still ECU-SF-20, Оригинальное руководство пользователя, Страница: 18 / 92

Результаты поиска

Содержание ECU-SF-20

Отзывы: