Still CX Скачать руководство пользователя страница 85

Страница: 85 / 156

Operation

Handling loads

DANGER

1044_713-001

Load handling safety rules

WARNING

Closely observe the following instructions before

picking up loads. Never touch or stand on moving

parts of the truck (e.g. lifting device, pushing

devices, work installations or devices for picking

up loads).

DANGER

WARNING

If the lift is used, take care not to trap

hands or feet.

The forks must never be used if there are

people underneath.

DANGER

Risk of accident when forks are changed:
If the forks are changed and a different type of

forks to the original forks is ﬁtted, the residual load

capacity changes.
When forks are changed, a new residual load

capacity rating plate must be afﬁxed.
If a truck is supplied without forks, the residual load

capacity rating plate for standard forks is afﬁxed

(see chapter 6 "Technical Data").

Before picking up the load

Load capacity

Do not exceed the load capacity of the truck.

50108043405 [EN]

Содержание CX





























































































































































Результаты поиска

Содержание CX

Отзывы:

Бренды по названию

Популярные бренды

Still CX, Оригинальное руководство пользователя

Результаты поиска

Содержание CX

Отзывы:

Бренды по названию

Популярные бренды