Still CX, Оригинальное руководство пользователя

Страница: 73 / 156

Operation
5
Driving
X
100
Ast
Wa
100
1044_000-011
Before driving
Dimensions of roadways and aisles
The dimensions and aisle widths contained in
section description apply under established
conditions to ensure safe driving. Check,
when necessary, if a wider aisle is required
when the load dimensions differ.
The required aisle widths (Ast) depend on the
dimensions of the load and may be calculated
following the formula: Ast = Wa - X + Length of
200 mm.
Turning radius (WA) values for
the calculation of aisle widths
(All values in mm)
Fork
lengths
Offset X 450 Ah 600 Ah
1190 1005 2430 2516
1450 1265 2690 2776
1650 1105 2530 2616
2150 1605 3030 3116
2390 1845 3270 3356
2390 1615 3040 3126
2900 2125 3550 3636
3100 2125 3550 3636
Obey the national regulations.
The truck may only be used on roadways not
having too tight curves, too large gradients
and too narrow and too low passages.
Condition of roadways
Roadways must be solid enough, free of
debris and dropped objects. Drainage ducts,
railway crossings and the like must be level
and, if necessary, provided with ramps so that
they can be crossed without jolts, if possible.
There must be sufficient clearance between
the highest parts of the truck or load and fixed
parts of the surroundings. The height depends
on the height of lift and the dimensions of the
load. Refer to the technical data.
50108043405 [EN] 65