Still CX Скачать руководство пользователя страница 74

Страница: 74 / 156

Operation

Driving

Rules for roadways and work area

Only the roads released for trafﬁc by the

operator or his representative may be driven

on. The roadways must be free of obstacles.

The load may only be stacked and stored at

the appropriate places. The operator and his

representative must ensure that unauthorized

persons keep away from the work area.

Hazards

Hazards on roadways must be marked with

the usual trafﬁc signs or, if necessary, by

additional warning signs.

123

456

789

PRG

1044_001-009

Emergency stop procedure

In an emergency, all truck functions can be cut

off.
– To do so, disconnect the battery plug (7).

The truck comes to a stop.

CAUTION

This safety feature may only be used in an emer-

gency.

NOTE

To restart the start, ﬁrst reconnect the battery

plug and then re-enter the driver code.

Danger zone

The danger zone is the area in which persons

are endangered through the movement of the

truck, working devices, load-lifting devices (eg

attachment) or the load. This also includes

the area within the range of falling loads or a

descending working device.

50108043405 [EN]

Содержание CX





























































































































































Результаты поиска

Содержание CX

Отзывы:

Похожие инструкции для CX

Бренды по названию

Популярные бренды

Still CX, Оригинальное руководство пользователя

Результаты поиска

Содержание CX

Отзывы:

Похожие инструкции для CX

Бренды по названию

Популярные бренды