Still CX Скачать руководство пользователя страница 64

Страница: 64 / 156

Operation

Intended use of the trucks

CAUTION

This machine is designed for order picking (col-

lecting and gathering together items stored in the

warehouse before dispatch), horizontal transport

tasks and entering and removing pallets to and from

stock.
The dimensions and capacity of the trailers, pallets

or containers must be adapted to the load being

transported and must ensure stability.
The table of characteristics and performance

attached to this user manual gives you some of the

information you need to check that the equipment

is suitable for the work being carried out.
Any speciﬁc usage must be authorised by the

site manager; an analysis of the potential risks

associated with this usage will enable him to put in

place any necessary additional safety measures.

Checks and actions prior to use

Daily pre-operational checks and

services

WARNING

Do not operate the truck until it is properly repaired

if any damage or faults are detected on the truck

or attachment (Option) during the following inspec-

tions. Safety features and switches must not be

removed or disabled. Fixed settings must not be

altered.

– Report any faults to the supervisors.

WARNING

Operation of the truck is only permissible with the

lids and ﬂaps closed and with all covers in place.

Daily checks before use

The following checks must be performed on a

daily basis in order to keep your truck in good

condition and to operate safely. These checks

supplement and do not replace the scheduled

maintenance operations.

50108043405 [EN]

Содержание CX





























































































































































Результаты поиска

Содержание CX

Отзывы:

Похожие инструкции для CX

Бренды по названию

Популярные бренды

Still CX, Оригинальное руководство пользователя

Результаты поиска

Содержание CX

Отзывы:

Похожие инструкции для CX

Бренды по названию

Популярные бренды