Still CX, Оригинальное руководство пользователя

Страница: 28 / 156

2
Introduction
Residual risks
Hazard Measure Check note
√ actioned
- not applicable
Notes
With driverless transport systems
Roadway quality
inadequate
Clean/clear driveways O BetrSichVO
(Workplace Safety
Ordinance)
Load carrier
incorrect/slipped
Reattach load to pallet O BetrSichVO
(Workplace Safety
Ordinance)
Drive behaviour
unpredictable
Employee training
O BetrSichVO
(Workplace Safety
Ordinance)
Driveways blocked Mark driveways
Keep driveways clear
O BetrSichVO
(Workplace Safety
Ordinance)
Driveways intersect Announce right-of-
way rule
O BetrSichVO
(Workplace Safety
Ordinance)
No person detection
during depositing and
retrieval
Employee training O BetrSichVO
(Workplace Safety
Ordinance)
.
Hazards to employees
In accordance with the operating safety ordi-
nance (BetrSichVO) and the German law on
health and safety at work (ArbSchG), the oper-
ator (see ⇒ Chapter "Definition of terms used
for responsible persons", P. 24) must iden-
tify and assess hazards during operation and
establish health and safety measures at the
workplace necessary to protect employees
(BetrSichVO). The operator must therefore
draw up appropriate operating instructions (§
6 ArbSchG) and make them available to the
driver. A person responsible for health and
safety must be appointed.
Truck construction and equipment is regulated
by the Machines Directive 2006/42/CE and
therefore bears the CE mark. On account of
their own CE mark, the attachment parts are
not included in the hazard assessment. The
operator must, however, select the type and
equipment of the trucks so as to comply with
local regulations relating to deployment.
20 50108043405 [EN]