Still CX-T-40 Скачать руководство пользователя страница 79

Страница: 79 / 146

Operation

Handling trailers

Approved towing applications

NOTE

The truck can be used to tow trailers. For this

purpose it is provided with a trailer coupling.

Maximum towed weight

The rated drawbar pull for towing corresponds

to the nominal drawbar pull stated on the

vehicle identiﬁcation plate of the tractor. The

maximum drawbar pull is the maximum force

of the tractor needed to overcome the starting

resistance of the trailing load (combined

weight of tractor, trailer and load).

CAUTION

In respect to trailing loads behind the tractor it must

be noted that under difﬁcult operating conditions, for

example, on ramps, on icy or slippery pavement, it

is the braking power and NOT the maximum tractive

force of the tractor that determines the maximum

load for the safe use of the vehicle.

CAUTION

The admissible maximum loads applies only for

the towing (unbraked) on level ground lower limit.

When towing uphill or downhill, reduce the maxi-

mum load capacity.
Loading and unloading on downslopes or upslopes

is not allowed. The trailer must be suitable for the

laden load. The load must be distributed evenly and

connected as speciﬁed.

Please advise the manufacturer of your

operating conditions. He will then supply the

appropriate information.
• Do not hook the tractor to rail mounted

vehicles.

• Do not push trailers (any type).

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды