Still CX-T-40, Оригинальное руководство пользователя

Страница: 62 / 146

5
Operation
Commissioning
Commissioning
123 456 789
PRG
PRG
1047_003-007
Turning on the truck
NOTE
The pallet truck is equipped with a digital
control and is taken into operation by entering
a driver code. The driver code consists of four
figures and is assigned by the pool manager.
It is used for normal use and operation of
the truck by the driver and operator. The
knowledge of the code is like a key and should
not be misused. Do not tell third persons your
driver code except if expressly ordered to do
so.
– Other codes can be entered, ⇒ Chap-
ter "Digicode control", P. 5-80.
123
456 789
PRG
PRG
1044_505-001
1 2 3 4
5
6 7
Entering the user code
– Press the I key (on) (6). The display
(4) shows the message
Code
(8). This
message switches off after approximately
one second. You can then enter the 4-digit
user code. The digits are entered in the
same way as on a mobile phone.
– Press keys (1), (2) or (3) several times until
the desired digit is shown;
for digits:
• 1-2-3, press key
123 (1),
• 4-5-6, press key
456
(2),
• 7-8-9, press key
789
(3).
54 51048070007 [EN]