Still CX-T-40 Скачать руководство пользователя страница 70

Страница: 70 / 146

Operation

Driving

Rules for roadways and working area

Only the roadways released for trafﬁc by the

operator or his representative may be driven

on. The roadways must be free of obstacles.

The load may only be stacked and stored at

the appropriate places. The operator and his

representative must ensure that unauthorized

persons keep away from the working area.

Hazard areas

Hazard areas on roadways must be marked

with the usual trafﬁc signs or, if necessary, by

additional warning signs.

123

456

789

PRG

1050_003-004

Behaviour in emergency situations

In an emergency, all the functions of the truck

can be cut off.
– To do so, disconnect the battery connector

(7). The truck will come to a halt.

CAUTION

This safety feature may only be used in an emer-

gency.

NOTE

To resume operation, ﬁrst reconnect the

battery connector and then re-enter the

driver’s code.

Different driving modes

The truck can be driven in the following modes:
• Driving, stand-on mode, see ⇒ Chap-

ter "Driving, stand-on mode", P. 5-63

• Driving, pedestrian mode with cockpit, slow

speed with throttle, see ⇒ Chapter "Driving,

51048070007 [EN]

Содержание CX-T-40



















































































































































Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды

Still CX-T-40, Оригинальное руководство пользователя

Результаты поиска

Содержание CX-T-40

Отзывы:

Похожие инструкции для CX-T-40

Бренды по названию

Популярные бренды