Still CX-T-40, Оригинальное руководство пользователя

Страница: 34 / 146

3
Safety
Basic principles for safe operation
Changes that will adversely affect stability,
load capacity, safety systems etc. must not be
made without the manufacturer’s approval.
The truck may only be converted with the writ-
ten approval of the manufacturer. Approval
from the relevant authority must be obtained
where applicable.
Changes to the brakes, steering, control el-
ements, circumferential view, special equip-
ment and attachments etc. must also not be
made without prior written approval from the
manufacturer.
For safety reasons, it is prohibited to drill holes
into the driver’s overhead guard or to perform
welding on it.
When carrying out welding on other parts of
the truck, it is essential that the battery and all
connections to the electronic control cards are
disconnected. Contact your service centre.
If the manufacturer goes into liquidation and
the company is not taken over by another legal
person, the operating company can make
modifications to the truck.
To do so, the operating company must fulfil
the following prerequisites:
Design documents, test documents and
assembly instructions associated with the
change must be archived and remain accessi-
ble at all times.
The capacity rating plate, decal information,
hazard warnings and the operating instruc-
tions must be checked to ensure they are
consistent with the changes and modified if
required.
The modification must be designed, checked
and implemented by a design office that
specialises in industrial trucks in accordance
with the standards and directives valid at the
time the modification is made.
Decal information with the following data must
be permanently affixed to the truck so that it is
clearly visible:
– Type of modification
– Date of modification
26 51048070007 [EN]