Stihl MS 151 C Скачать руководство пользователя

Страница: 18 / 40

9.2

Mixing fuel

NOTICE

Unsuitable fuels or a mixing ratio that deviates

from the specification can lead to severe engine

damage. The engine, seals, fuel lines and fuel

tank may be damaged if low-quality gasoline or

engine oil is used.

9.2.1

Gasoline

Use only high-quality gasoline with an octane rat‐

ing of at least 90 ROC – leaded or unleaded.
Gasoline with an alcohol component exceeding

10% can cause impaired engine performance in

engines with manually adjustable carburetors

and thus should not be used in these engines.
Engines with M-Tronic deliver full engine per‐

formance using gasoline with an alcohol compo‐

nent of up to 27% (E27).
9.2.2

Engine oil

If you mix the fuel yourself, use only STIHL two-

stroke engine oil or another high-performance

engine oil classified as JASO FB, JASO FC,

JASO FD, ISO-L-EGB, ISO-L-EGC or ISO-L-

EGD.
STIHL specifies STIHL HP Ultra two-stroke

engine oil or an equivalent high-performance

engine oil in order to maintain emission limits

over the machine’s service life.
9.2.3

Mixing ratio

with STIHL two-stroke engine oil 1:50; 1:50 =

1 part oil + 50 parts gasoline
9.2.4

Examples

Quantity of gaso‐

line

STIHL two-stroke

engine oil 1:50

Liters

(ml)

0.02

(20)

0.10

(100)

0.20

(200)

0.30

(300)

0.40

(400)

0.50

(500)

► Pour oil into an approved safety fuel canister

first, then add gasoline and mix thoroughly

9.3

Storing fuel mixture

Store in approved safety fuel canisters only in a

dry, cool and secure place protected against light

and sunlight.

Fuel mixture deteriorates with age – mix only as

much as needed for a few weeks. Do not store

fuel mixture for longer than 30 days. The fuel

mixture can become unusable more quickly if

exposed to light, sunlight or low or high tempera‐

tures.
STIHL MotoMix however can be stored for up to

5 years without any problems.

► Shake the canister containing the fuel mixture

thoroughly before refueling

WARNING

Pressure may have built up in the canister –

open it carefully.
► The fuel tank and the canister in which fuel

mixture is stored should be cleaned thoroughly

from time to time

Residual fuel and the liquid used for cleaning

must be disposed of in accordance with regula‐

tions and without harming the environment!

10 Fueling

10.1

Preparations

201

1BA010 KN

► Before fueling, clean the filler cap and the area

around it to ensure that no dirt falls into the

fuel tank.

► Position the machine so that the filler cap

faces up.

English

10 Fueling

0458-506-0121-C

Содержание MS 151 C









































Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды

Stihl MS 151 C, Инструкция по эксплуатации

Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды