Stihl MS 151 C Скачать руководство пользователя

Страница: 14 / 40

Shout a warning before starting the felling cut.

► Plunge cut the felling cut (E) – plunge the

guide bar fully in

► Engage the spiked bumper behind the hinge

and use this as the rotation point – reposition

the chainsaw as little as possible

► Make the felling cut up to the hinge (1)

–

Do not cut into the hinge

► Make the felling cut up to the stabilizing

strap (2)

–

Do not cut into the stabilizing strap

001BA273 KN

► Set the felling wedge (3)
Shout a second warning immediately before the

tree falls.

► Cut through the stabilizing strap, horizontal

level with the felling cut, with arms fully exten‐

ded

B) Thick trunks
Implement this felling cut when the trunk diame‐

ter is greater than the cutting length of the

machine.

001BA263 KN

Shout a warning before starting the felling cut.

► Engage the spiked bumper at the height of the

felling cut and use this as the rotation point –

reposition the chainsaw as little as possible

► Tip of the guide bar must penetrate the wood

before the hinge (1) – guide the chainsaw

absolutely horizontally and swivel as widely as

possible

► Make the felling cut up to the hinge (2)

–

Do not cut into the hinge

► Make the felling cut up to the stabilizing

strap (3)

–

Do not cut into the stabilizing strap

The felling cut must be continued on the oppo‐

site side of the trunk.
Ensure that the second cut is at the same level

as the first cut.

► Plunge cut the felling cut

► Make the felling cut up to the hinge (4)

–

Do not cut into the hinge

► Make the felling cut up to the stabilizing

strap (5)

–

Do not cut into the stabilizing strap

001BA274 KN

► Set the felling wedge (6)
Shout a second warning immediately before the

tree falls.

► Cut through the stabilizing strap, horizontal

level with the felling cut, with arms fully exten‐

ded

4.8

Felling Cut with Holding Strap

(Leaner)

A) Thin trunks
Implement this felling cut when the trunk diame‐

ter is smaller than the cutting length of the chain‐

saw.

001BA265 KN

► Plunge cut the guide bar into the trunk until it

exits on the other side

► Make the felling cut (E) towards the hinge (1)

–

Cut horizontally

–

Do not cut into the hinge

English

4 Working Techniques

0458-506-0121-C

Содержание MS 151 C









































Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды

Stihl MS 151 C, Инструкция по эксплуатации

Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды