Stihl MS 151 C Скачать руководство пользователя

Страница: 15 / 40

► Make the felling cut towards the holding strap

(2)

–

Cut horizontally

–

Do not cut into the holding strap.

001BA266 KN

Shout a second warning immediately before the

tree falls.

► With outstretched arms, cut through the hold‐

ing strap at a downward angle from outside.

B) Thick trunks

001BA267 KN

Perform this felling cut when the tree diameter is

greater than the cutting length of the chainsaw.

► Engage the bumper spike behind the holding

wood and use this as the rotation point – repo‐

sition the chain saw as little as possible

► The guide bar nose enters the wood (1) before

it reaches the hinge – hold the chainsaw hori‐

zontally and swing it as far as possible.

–

Do not cut into the holding strap or hinge.

► Make the felling cut up to the hinge (2)

–

Do not cut into the hinge

► Make the felling cut up to the holding strap (3)

–

Do not cut into the holding strap.

The felling cut must be continued on the oppo‐

site side of the trunk.
Ensure that the second cut is at the same level

as the first cut.

► Engage the spiked bumper behind the hinge

and use this as the rotation point – reposition

the chainsaw as little as possible

► Tip of the guide bar must penetrate the wood

before the holding strap (4) – guide the chain‐

saw absolutely horizontally and swivel as

widely as possible

► Make the felling cut up to the hinge (5)

–

Do not cut into the hinge

► Make the felling cut up to the holding strap (6)

–

Do not cut into the holding strap.

001BA268 KN

Shout a second warning immediately before the

tree falls.

► With outstretched arms, cut through the hold‐

ing strap at a downward angle from outside.

Cutting Attachment

A cutting attachment consists of the saw chain,

guide bar and chain sprocket.
The cutting attachment that comes standard is

designed to exactly match the chain saw.

001BA248 KN

–

The pitch (t) of the saw chain (1), chain

sprocket and the nose sprocket of the Rollo‐

matic guide bar must match.

–

The drive link gauge (2) of the saw chain (1)

must match the groove width of the guide

bar (3).

If non-matching components are used, the cut‐

ting attachment may be damaged beyond repair

after a short period of operation.

5 Cutting Attachment

English

0458-506-0121-C

Содержание MS 151 C









































Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды

Stihl MS 151 C, Инструкция по эксплуатации

Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды