Stihl MS 151 C страница 37 Скачать руководство пользователя

Страница: 37 / 40

27.9

Exhaust Emissions

The CO

value measured in the EU type appro‐

val procedure is specified at
www.stihl.com/co2
in the product-specific technical data.
The measured CO

value was determined on a

representative engine in accordance with a

standardized test procedure under laboratory

conditions and does not represent either an

explicit or implied guarantee of the performance

of a specific engine.
The applicable exhaust emission requirements

are fulfilled by the intended usage and mainte‐

nance described in this User Manual. The oper‐

ating license shall be void if the engine is modi‐

fied in any way.

28 Special Accessories

–

Spiked bumper

–

File holder with round file

–

Filing gauge

–

Reference gauges

–

STIHL lubricating grease

–

STIHL filler nozzle for fuel – helps avoid spills

and overfilling during refueling

–

STIHL filler nozzle for chain oil – helps avoid

spills and overfilling

Contact your STIHL dealer for more information

on these and other special accessories.

28.1

Mounting the Spiked Bumper

201

1BA044 KN

► Secure the spiked bumper (1) to the engine

housing with the two screws (2).

29 Ordering Spare Parts

Please enter your saw model, serial number as

well as the part numbers of the guide bar and

saw chain in the spaces provided. This will make

re-ordering simpler.

The guide bar and saw chain are subject to nor‐

mal wear and tear. When purchasing these

parts, always quote the saw model, the part

numbers and names of the parts.
Model

Serial number

Guide bar part number

Chain part number

30 Maintenance and Repairs

Users of this machine may only carry out the

maintenance and service work described in this

user manual. All other repairs must be carried

out by a servicing dealer.
STIHL recommends that you have servicing and

repair work carried out exclusively by an author‐

ized STIHL servicing dealer. STIHL dealers are

regularly given the opportunity to attend training

courses and are supplied with the necessary

technical information.
When repairing the machine, only use replace‐

ment parts which have been approved by STIHL

for this power tool or are technically identical.

Only use high-quality replacement parts in order

to avoid the risk of accidents and damage to the

machine.
STIHL recommends the use of original STIHL

replacement parts.
Original STIHL parts can be identified by the

STIHL part number, the

{

logo and the

STIHL parts symbol

(the symbol may appear

alone on small parts).

31 Disposal

Contact the local authorities or your STIHL serv‐

icing dealer for information on disposal.
Improper disposal can be harmful to health and

pollute the environment.

28 Special Accessories

English

0458-506-0121-C

Содержание MS 151 C









































Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды

Stihl MS 151 C, Инструкция по эксплуатации

Результаты поиска

Содержание MS 151 C

Отзывы:

Похожие инструкции для MS 151 C

Бренды по названию

Популярные бренды