23
HTE 60
English
Depth gauge setting
The depth gauge determines the height
at which the cutter enters the wood and
thus the thickness of the chip removed.
Distance between depth gauge and
cutting edge
a =
0.018" (0.45 mm).
This setting may be increased by 0.008"
(0.2 mm) for cutting softwood in mild
weather season – no frost.
Lowering depth gauges
The depth gauge setting is reduced
when the chain is sharpened because
the top plate of the cutter slopes
downward towards the back.
:
Check the depth gauge setting
every time you sharpen the chain.
:
Place a filing gauge (
1
) that
matches the chain pitch on the
chain – if the depth gauge projects
from the filing gauge, the depth
gauge has to be lowered.
:
File down the depth gauge until it is
level with the filing gauge.
:
File the top of the depth gauge
parallel to the stamped service
marking (see arrow) – but do not
lower the highest point of the depth
gauge in this process.
The kickback tendency of the
chainsaw is increased if the depth
gauges are too low.
:
Place filing gauge on the chain –
highest point of depth gauge must
be level with the filing gauge.
689BA023 KN
a
689BA047 KN
1
689BA051 KN
689BA044 KN
689BA052 KN
Содержание HTE 60
Страница 31: ...31 HTE 60 English...
Страница 32: ...32 English HTE 60...