![background image](http://html1.mh-extra.com/html/stihl/hte-60/hte-60_manual_1379553019.webp)
19
HTE 60
English
:
Turn the bar over
–
every time you sharpen the chain –
and every time you replace the
chain – this avoids one-sided wear,
especiallly at nose and underside of
the bar.
Regularly clean
1 =
oil inlet hole
2 =
oil passage
3 =
bar groove
:
Measure groove depth –
with scale on filing gauge – see
"Special Accessories" – in area
used most for cutting on Rollomatic
bars.
If groove depth is less than specified:
:
Replace the guide bar.
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the rails.
For periods of about 3 months or longer:
:
Remove and clean the saw chain
and guide bar, spray with corrosion
inhibiting oil.
:
If you use biological chain and bar
lubricant, e.g. STIHL Bioplus,
completely fill the chain oil tank.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Taking Care of Guide Bar
3
2
1
390BA050 KN
Chain type
Chain pitch Minimum
groove depth
Picco-Mini
3/8" P
5.0 mm
(0.20")
Storing the Machine
Содержание HTE 60
Страница 31: ...31 HTE 60 English...
Страница 32: ...32 English HTE 60...