8
English
HTE 60
Position the cutting attachment with the
hook against the branch and then
perform the cross-cut. This reduces the
risk of the pruner being jerked forward
as you start the cross-cut.
Always start the cut with the chain
running.
Work only with a properly sharpened
and tensioned chain – the depth gauge
setting should not be too wide.
Perform cross-cut from the top
downward to avoid the chain pinching in
the cut.
If branch is thick or heavy, make a
relieving cut (see chapter on ”Using the
Pole Pruner”).
To reduce the risk of injury, take special
care when cutting branches under
tension.
Always make a relieving cut on the
compression side first and then perform
the bucking cut at the tension side. This
helps avoid the saw chain pinching in
the cut.
Take special care when cutting
shattered wood – sharp slivers of wood
may be caught and flung in your
direction.
If on a slope, stand on the uphill side or
to one side of the branch to be cut.
Watch out for rolling branches.
When you come to the end of a cut, note
that the unit is no longer supported by
the guide bar in the cut. Hold the unit
firmly to take its weight at the end of the
cut and avoid loss of control.
Always pull the unit out of the cut with
the chain running.
To avoid the risk of accidents, use your
pole pruner for limbing and pruning only.
It is not designed for felling.
Make sure your saw chain does not
touch any foreign materials:
Stones, nails, etc. may be flung off and
damage the saw chain.
Position the power cord so that it cannot
be damaged and does not endanger
anyone. If the power cord is twisted:
Disconnect the plug from the power
supply and straighten out the cord.
Position the power cord so that it cannot
come into contact with the rotating
chain.
Make sure the power cord does not
chafe on edges, pointed or sharp
objects. Do not squeeze the power cord
through narrow gaps in doors or
windows.
Before carrying the unit a short distance,
e.g. to next cutting site:
Switch off the
motor
(release the switch).
Before leaving the electric pole pruner
unattended: switch off the motor and
disconnect the plug from the power
supply.
390BA052 KN
Содержание HTE 60
Страница 31: ...31 HTE 60 English...
Страница 32: ...32 English HTE 60...