7
HTE 60
English
When working at a height that exceeds
the unit’s reach use a lift bucket.
Never work on a ladder, in a tree or on
any other insecure support. Never
attempt to operate your pole pruner with
one hand.
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
To reduce the risk of accidents, take a
break in good time to avoid tiredness or
exhaustion.
Work calmly and carefully – in daylight
conditions and only when visibility is
good – ensure you do not endanger
others – stay alert at all times.
The dust that occurs during operation of
this machine (wood dust) may be
harmful to health. If dust levels are very
high, wear a suitable respirator.
If your power tool is subjected to
unusually high loads for which it was not
designed (e.g. heavy impact or a fall),
always check that it is in good condition
before continuing work – see also
“Before Starting”.
Check in particular that the safety
devices are working properly. Do not
continue operating your power tool if it is
damaged. In case of doubt, have the
machine checked by your servicing
dealer.
Limbing
Hold the pole pruner at an angle of not
more than 60° from the horizontal. Do
not stand directly underneath the limb
being cut. Watch for falling wood.
Keep the work area clear – remove
interfering limbs and brush.
Before limbing, establish a path of
escape and remove all obstacles.
max
60°
247BA003 KN
Содержание HTE 60
Страница 31: ...31 HTE 60 English...
Страница 32: ...32 English HTE 60...