3.5
Working Techniques
3.5.1
Horizontal Cut (with cutter bar at an
angle)
388BA029 KN
Cutting close to the ground from a standing posi‐
tion, e.g. low shrubs.
Swing the cutter bar up and down as you move
along the hedge – use both sides of the cutting
blades, do not rest the cutter bar on the ground.
WARNING
The K version (HL 92 K) is not approved for cut‐
ting close to the ground.
3.5.2
Vertical Cut (with cutter bar at an
angle)
388BA030 KN
Cutting without standing directly next to the
hedge, e.g. flowerbed between operator and
hedge.
Swing the cutter bar up and down in an arc as
you move along the hedge – use both sides of
the cutting blades.
English
3 Using the Unit
8
0458-519-8321-D
