Stihl Cutquik TS 800, Инструкция по эксплуатации

Страница: 6 / 40

TS 800
English
4
Facial protection does not provide
adequate protection for the eyes.
While working, dust (for example,
crystalline material from the object to be
parted-off), vapor and smoke may be
produced – danger for health!
Always wear a dust mask if dust is
generated.
If fumes or smoke are anticipated (e. g.,
when cutting composite materials), wear
respiratory protection.
Wear "personal" noise protectors – for
example, ear protectors.
STIHL can supply a comprehensive
range of personal protective clothing
and equipment.
Transporting the machine
Always turn off the engine first.
Carry the device at the tubular handle
only – abrasive wheel pointing to the
rear – hot muffler away from the body.
Do not touch hot device parts, in
particular the muffler surface – risk of
burns!
Never transport the engine-driven
device with attached abrasive wheel –
risk of breakage!
In vehicles: Properly secure the engine-
driven device to prevent turnover, fuel
spillage and damage.
Refuelling
Switch off the engine before refueling.
Never refuel the machine while the
engine is still hot – the fuel may spill over
– risk of fire!
Open the fuel filler cap carefully so that
any excess pressure is relieved
gradually and fuel does not splash out.
The machine may only be refuelled in a
well ventilated place. If fuel has been
spilled, clean immediately the engine-
driven device – prevent your clothes
from being contaminated with fuel,
otherwise change clothes at once.
Dust may collect on the engine unit,
especially around the carburetor. If dust
gets mixed with fuel – risk of fire!
Remove the dust from the engine unit
regularly.
Various cut-off machines may be
equipped with various filler caps:
Bayonet filler cap
Never use a tool to open or close the
bayonet filler cap. The cap can be
damaged and fuel may escape.
Secure the bayonet filler cap tightly after
refueling.
Filler cap with screw thread
This helps reduce the risk of unit
vibrations causing an incorrectly
tightened filler cap to loosen or come off
and spill quantities of fuel.
Wear safety boots with
steel toe caps and non-
slip soles.
Wear a hard hat wher
-
ever there is any risk of
falling objects. Wear a
face shield and always
wear safety glasses –
danger due to flying
objects.
Wear sturdy protective
gloves made of a resist
-
ant material (e. g.
leather).
Petrol is an extremely
flammable fuel – keep
clear of naked flames and
fire – do not spill any fuel
– no smoking.
Look out for leaks! Never
start the engine if fuel has
been spilled or is leaking
– Fatal burns may result!
Close the filler cap as
tightly as possible after
refueling.