Stihl Cutquik TS 800, Инструкция по эксплуатации

Страница: 20 / 40

TS 800
English
18
Removing the adjusting lever
N
Remove screws (1)
N
Remove the adjusting lever (2)
N
Pull out sealing plug (3)
Slackening the V-belt
N
To relax the poly V-belt, loosen the
nuts (1) – do not unscrew the
nuts (1) from the studs
N
Turn the tensioning nut (2)
counterclockwise with the
combination wrench –
approx. 1/4 turn, as far as it will
go = 0
N
Unscrew nuts (1) from the studs –
nuts (1) are fastened to the belt
guard so that they are secured
against loss
Removing the V-belt guard
N
Remove the V-belt guard (1) and
remove the poly V-belt from the
front pulley
N
Remove the "support with
guard" (2)
Preparing the "support with guard" for
outboard mounting
N
Unscrew stop pin (1)
N
Turn the guard so that it is in the
position shown (see picture)
N
Screw in and tighten the stop pin (1)
N
Move the adjusting lever (2) to
position A
N
Screw in and tighten the screws (3)
N
Press in sealing plug (4)
377BA002 KN
1
2
3
1
1
2
1
377BA003 KN
377BA004 KN
1
2
377BA005 KN
1
2
4
377BA006 KN
3
1
A