Stihl Cutquik TS 800, Инструкция по эксплуатации

Страница: 31 / 40

TS 800
English
29
In some countries, the mufflers are fitted
with a spark arresting screen.
N
If engine performance deteriorates,
check the spark arresting screen in
the muffler
WARNING
Wait until engine has cooled completely
before performing the following
operations.
Versions
There are two different spark arresting
screen versions in the muffler.
–
Spark arresting screen fastened
with clip
–
Spark arresting screen fastened
with screw
Spark arresting screen fastened with
clip
N
Use a suitable tool to squeeze ends
of clip (1) together and then lift the
clip away
N
Remove the spark arresting screen
(2) from the muffler
N
Clean the soiled spark arresting
screen
N
If the screen is damaged or heavily
carbonized, fit a new one
N
Refit the spark arresting screen in
reverse order of steps
Spark arresting screen fastened with
screw
N
Remove screw (1)
N
Pull out spark arresting screen (2)
with a suitable tool
N
Clean the soiled spark arresting
screen
N
If the screen is damaged or heavily
carbonized, fit a new one
N
Refit the spark arresting screen in
reverse order of steps
If the engine is down on power, difficult
to start or runs poorly at idle speed, first
check the spark plug.
N
Removing the spark plug
N
Clean dirty spark plug.
N
Check electrode gap (A) and
readjust if necessary – see
"Specifications".
N
Rectify the problems which have
caused fouling of the spark plug.
Possible causes are:
–
Too much oil in fuel mix.
–
Dirty air filter.
–
Unfavorable running conditions.
N
Fit a new spark plug after about 100
operating hours – or sooner if the
electrodes are badly eroded. Install
Spark Arresting Screen in
Muffler
1
2
376BA070 KN
Checking the Spark Plug
000BA002 KN