Stihl Cutquik TS 800, Инструкция по эксплуатации

Страница: 16 / 40

TS 800
English
14
Abrasive wheels are exposed to
extremely high loads especially during
freehand cutting.
Therefore only for use of approved and
correspondingly labeled abrasive
wheels with hand-held machines as per
EN 13236 (diamond) or EN 12413
(composite resin). Note maximum
permissible speed of the abrasive wheel
– risk of accident!
The abrasive wheels, which have been
developed by STIHL in cooperation with
renowned manufacturers of abrasive
wheels, are of high quality and tailored
precisely to the respective intended use
as well as the engine performance of the
cut-off machine.
They are of consistently outstanding
quality.
Transport and storage
–
Do not expose abrasive wheels to
direct sunshine or other thermal
stresses during transport and
storage
–
Avoid jolting and impacts
–
Stack abrasive wheels flat on a level
surface in the original packaging in
a dry place where the temperature
is as constant as possible
–
Do not store abrasive wheels in the
vicinity of aggressive fluids
–
Store abrasive wheels in a frost-free
place
Types:
–
for dry applications
–
for wet applications
The proper selection and use of
composite resin cutting wheels ensures
economical use and avoids accelerated
wear. The product code which appears
–
on the label and
–
on the packaging (table with
recommendations for use) is an aid
to selection
STIHL composite resin cutting wheels
are suitable, depending on the version,
for cutting the following materials:
–
Asphalt
–
Concrete
–
Stone
–
Ductile cast iron pipes
–
Steel; STIHL composite resin
cutting wheels are not suitable for
cutting railway tracks
Do not cut any other materials – risk of
accident!
For wet applications.
The proper selection and use of
diamond abrasive wheels ensures
economical use and avoids accelerated
wear. The product code which appears
–
on the label and
–
on the packaging (table with
recommendations for use) is an aid
to selection
STIHL diamond abrasive wheels are
suitable, depending on the version, for
cutting the following materials:
–
Asphalt
–
Concrete
–
Stone (hard stone)
–
Abrasive concrete
–
Fresh concrete
–
Clay brick
–
Clay pipe
Do not cut any other materials – Risk of
accident!
Never use diamond abrasive wheels
with side plating as they jam in the cut
and can result in extreme kickback –
Risk of accident!
Cutting wheels Composite resin cutting
wheels
Diamond cutting wheels