Stihl 1139 Series Скачать руководство пользователя страница 44

Страница: 44 / 48

Guide bar part number

Chain part number

35 Maintenance and Repairs

Users of this machine may only carry out the

maintenance and service work described in this

user manual. All other repairs must be carried

out by a servicing dealer.
STIHL recommends that you have servicing and

repair work carried out exclusively by an author‐

ized STIHL servicing dealer. STIHL dealers are

regularly given the opportunity to attend training

courses and are supplied with the necessary

technical information.
When repairing the machine, only use replace‐

ment parts which have been approved by STIHL

for this power tool or are technically identical.

Only use high-quality replacement parts in order

to avoid the risk of accidents and damage to the

machine.
STIHL recommends the use of original STIHL

replacement parts.
Original STIHL parts can be identified by the

STIHL part number, the

{

logo and the

STIHL parts symbol

(the symbol may appear

alone on small parts).

36 Disposal

Contact the local authorities or your STIHL serv‐

icing dealer for information on disposal.
Improper disposal can be harmful to health and

pollute the environment.

000BA073 KN

► Take STIHL products including packaging to a

suitable collection point for recycling in accord‐

ance with local regulations.

► Do not dispose with domestic waste.

37 EC Declaration of Con‐

formity

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declare in exclusive responsibility that the prod‐

uct
Model:

Chain saw

Make:

STIHL

Type:

MS 171

MS 171 C

MS 171 C-BE

MS 181

MS 181 C

MS 181 C-BE

MS 211

MS 211 C

MS 211 C-BE

Serial identification number: 1139

Displacement

all MS 171:

31.8 cm

all MS 181:

31.8 cm

all MS 211:

35.2 cm

conforms to the provisions of Directives

2011/65/EU, 2006/42/EC, 2014/30/EU and

2000/14/EC and has been developed and manu‐

factured in compliance with the following stand‐

ards in the versions valid at the time of produc‐

tion:
EN ISO 11681‑1, EN 55012, EN 61000‑6‑1
The measured and guaranteed equivalent sound

power level has been determined in accordance

with Directive 2000/14/EC, Annex V, and stand‐

ard ISO 9207.
Measured sound power level
all MS 171:

112 dB(A)

all MS 181:

112 dB(A)

all MS 211:

113 dB(A)

Guaranteed sound power level
all MS 171:

114 dB(A)

all MS 181:

114 dB(A)

all MS 211:

115 dB(A)

The EC type approval test was carried out at the
DPLF

Deutsche Prüf- und Zertifizierungsstelle für Land-

und Forsttechnik (NB 0363)

Spremberger Straße 1

D-64823 Groß-Umstadt
Certification No.:

all MS 171:

K-EG-2009/4442

English

35 Maintenance and Repairs

0458-533-0121-E

Содержание 1139 Series

















































Результаты поиска

Содержание 1139 Series

Отзывы:

Бренды по названию

Популярные бренды

Stihl 1139 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 1139 Series

Отзывы:

Бренды по названию

Популярные бренды