manualshive.com logo in svg

Stihl 1139 Series, Инструкция по эксплуатации, Страница: 25 / 48

Поделиться
Скачать
Stihl 1139 Series Скачать руководство пользователя страница 25

16.1

Saw chain, lock

143BA011 KN

–

in an emergency

–

when starting

–

when idling

Press the hand guard towards the nose of the

guide bar with the left hand - or automatically

due to kickback: Saw chain is blocked - and

stops running.

16.2

Disengage the chain brake.

143BA012 KN

► Pull the hand guard back towards the front

handle.

NOTICE

The chain brake must be released before open‐

ing the throttle (except during functional check‐

out) and before sawing.
Running the engine at high revs with the chain

brake engaged (chain locked) will quickly dam‐

age the engine and chain drive (clutch, chain

brake).

The chain brake is also activated by the inertia of

the front hand guard if the kickback force of the

saw is high enough: The hand guard is acceler‐

ated toward the bar nose – even if your left hand

is not behind the hand guard, e.g. during felling

cut.
The chain brake will operate only if the hand

guard has not been modified in any way.

16.3

Checking Operation of the

Chain Brake

Before starting work: Run engine at idle speed,

engage the chain brake (push hand guard

towards bar nose) and open the throttle wide for

(no more than 3 seconds) – the chain must not

rotate. The hand guard must be free of dirt and

easily moveable.

16.4

Chain Brake Maintenance

The chain brake is subject to (normal wear). It is

necessary to have it serviced and maintained

regularly by trained personnel. STIHL recom‐

mends that maintenance and repair work be car‐

ried out only by authorised STIHL dealers. The

following intervals must be complied with:
Full-time use:

quarterly

Part-time use:

every six months

occasional use:

annually

17 Winter Operation

 

17.1

Winter slide (MS 211 only)

At temperatures below +10 °C:

► Remove the shroud – see "Shroud"

1

533BA003 KN

2

► Use the combination wrench to turn the slide

next to the spark plug by 45° counterclockwise

17 Winter Operation

English

0458-533-0121-E

25

Содержание 1139 Series

















































Отзывы:

Нет отзывов