Stihl 1139 Series Скачать руководство пользователя страница 28

Страница: 28 / 48

18.4.2

Between the knees or thighs

143BA019 KN

► clamp the rear handle between the knees or

thighs

► grip the handlebar firmly with the left hand –

thumb wrapped around the handlebar

18.5

Starting

18.5.1

Standard versions

143BA020 KN

► with the right hand, pull the starter grip slowly

until you feel it engage – and then give it a

brisk strong pull – simultaneously press down

on the handlebar – do not pull the starter rope

out all the way – risk of breakage! Do not let

the starter grip snap back – guide it vertically

back into the housing so that the starter rope

can rewind properly

With a new engine or after a long period of dis‐

use, with machines without an additional manual

fuel pump, it may be necessary to pull the starter

rope several times – to prime the fuel line.
18.5.2

Versions with ErgoStart

WARNING

This machine is extremely simple and easy to

start, even for children – risk of accident!

Make absolutely certain that children or other

unauthorized persons cannot attempt to start the

machine:

–

never leave the machine unattended during

work breaks

–

secure storage after work

The ErgoStart stores the energy for starting the

chain saw. For this reason, a few seconds may

pass between the pulling of the starter rope and

the starting of the engine.
For versions with ErgoStart, there are two ways

to start the machine:

► pull the starter grip slowly and smoothly – or –

with the right hand, pull the starter grip in sev‐

eral short pulls of the starter rope, pulling the

rope out only a little bit each time

► during starting, press down on the handlebar –

do not pull out the starter rope all the way –

risk of breakage!

► Do not let the starter grip snap back – guide it

vertically back into the housing so that the

starter rope can rewind properly

18.6

Starting the chain saw

WARNING

There must not be anyone within the swivel

range of the chain saw.
► Observe safety precautions

English

18 Starting / Stopping the Engine

0458-533-0121-E

Содержание 1139 Series

















































Результаты поиска

Содержание 1139 Series

Отзывы:

Бренды по названию

Популярные бренды

Stihl 1139 Series, Инструкция по эксплуатации

Результаты поиска

Содержание 1139 Series

Отзывы:

Бренды по названию

Популярные бренды