Stieber Clutch
Page 4/21
M1016E_0
Assembly and maintenance manual
1.1
Information relating to the assembly and maintenance manual
This assembly and maintenance manual provides important information regarding the
installation and commissioning of the one-way clutch.
Prerequisite for safe operation is compliance with all of the stated safety and handling
instructions.
Moreover, the relevant local accident protection guidelines and general safety provisions for
the field of application of the one-way clutch are to be complied with.
Read the assembly and maintenance manual carefully prior to installation and
commissioning. It is a product component and must be kept in the immediate vicinity of the
installation site and be accessible to personnel at all times. Furthermore, all safety
instructions stated in the assembly and maintenance manual are to be observed.
1.2
Explanation of symbols
Warnings are marked throughout this assembly and maintenance manual by symbols. These
warning symbols are introduced by signal words which indicate the extent of the danger.
Comply with these warning symbols under all circumstances and act with due care and
attention to avoid accidents, personal injury and property damage.
DANGER!
...indicates an imminently dangerous situation which can be
fatal or cause severe injuries if it is not averted.
WARNING!
...indicates a potentially dangerous situation which can be
fatal or cause severe injuries if it is not averted.
ATTENTION!
...indicates a potentially dangerous situation which can
cause minor or light injuries if it is not averted.
CAUTION!
...indicates a potentially dangerous situation which can
cause property damage if it is not averted.
NOTE!
… highlights helpful tips and recommendations as well as
information for efficient and fault-free operation.
1 General
