Stieber Clutch
Page 20/21
M1016E_0
Assembly and maintenance manual
CAUTION
Risk of injury due to falling components!
The outer race or inner race can fall down if the transportation
lock has been removed. Therefore:
Install the transportation lock!
Pull the one-way clutch from the machine shaft. Use suitable lifting gear for this
NOTE
The local provisions regarding the disposal of metallic components
and any lubricants present are to be observed.
The one-way clutch is comprised of metallic materials which are coated with grease or oil.
Metallic materials are fully recyclable. Lubricants and anticorrosive agents are to be disposed
of separately. The local disposal provisions are to be observed in this regard.
The manufacturer is to be contacted immediately should any faults arise.
STIEBER GMBH, D-69126 Heidelberg, Hatschekstr. 36, Germany
Phone +49 (0) 6221 3047-0, Fax -31
WARNING
Risk of injury due to incorrect spare parts!
Incorrect or faulty spare parts can cause damage, malfunctions or
total failure as well as impair safety. Therefore:
Only use original spare parts from the manufacturer.
Procure spare parts only from authorized dealers or from the manufacturer directly.
9 Disposal
10 Faults
11 Spare parts
12 Appendix
