4
Stewart Filmscreen
ABOUT THE CABLE CLIMBER
Please take a moment to review this manual prior to installation and operation
The Cable Climber offers a unique electrically operated projection solutionfor permanent installations
with high ceilings When operating the CableClimber, the motorized screen housing automatically drops
down withscreen contained and inactive to the top of the viewing plane The screenmotor then can be
deployed and the projection screen surface descends into theviewing area Cable deployment range up
to 18 feet (5 5m) can bespecified
PREPARING THE INSTALLATION
`
Before proceeding with the installation of this screen, take time to thoroughly read and understand
these installation and operation instructions
`
All electrical wiring installations must conform to local and national codes and should be
performed by qualified service personnel
`
There are no user-serviceable parts contained within the unit
PREPARATION
Specifications regarding the individual screen dimensions, weight, mounting type, and controls are
provided by the factory when the unit is ordered
Before beginning the installation:
`
Check the specifications for the type of mounting and switch control to be used
`
Ensure that the mounting area and electrical connection are prepared
`
Check the size and weight of the screen to be installed so that you can plan for the number of people
required for the mounting procedure Weight can exceed 1200 lbs (544 kg) You need at least two
people to mount the smaller screens; more are needed for larger, heavier screens
You will need:
`
Enough hydraulic lifts for the personnel supporting the screen during the mounting process
`
A level
`
Fasteners appropriate for the surface on which the screen is being mounted
