12
Stewart Filmscreen
ADJUSTING THE SCREEN AND HOUSING EXTENSIONS
To decrease the screen extension:
1 Lower the screen until it is extended about halfway down
2 Locate the white extension (down) limit switch located on the left side of the screen tube Use a
5/32” (0 39 cm) Allen Key or L-shaped driver to turn the switch in aclockwise direction One com-
plete turn of the switch will makeapproximately a 1” / 2 5 cm change in the screen’s stop position
3 Activate the screen in the down direction until it reaches the newly reduced stop position Repeat
this procedure until the desired stop position is reached
Once you have made the adjustment, whenever you lower the screen, it will automatically stop at the
new position Note: It is recommended that you make a note of any changes made to the factory preset
SCREEN CARE AND CLEANING
We encourage you to keep the screen clean To protect the screen when it is not in use, store it in the
fully retracted position Avoid getting any foreign material on the screen, as cleaning may prove very
difficult It may not be possible to remove scratches, paint, ink, etc
GENERAL MAINTENANCE
The screen surface on your screen is delicate Special attention to these instructions should be followed
when cleaning
`
A draftsman-style brush may be used to lightly whisk away any loose dirt or dust particles (This type of
brush is usually available at office supply stores ) Stewart Filmscreen has an optional screen cleaning kit
that contains the proper type of brush Contact your dealer if you would like to obtain this cleaning kit
`
Particles left on the screen when it is retracted into the case may form an impression on the screen
surface Periodically wipe the back of the screen with a clean damp cloth
`
For tougher spots, use a solution of mild detergent and water Rub lightly using a sponge Blot with a
damp sponge to absorb excess water Residual water marks will evaporate within a few minutes Let
the screen air dry completely before retracting
Do not use any other cleaning materials on the screen Contact the factory if you have questions about
removing difficult spots
REPLACEMENT PARTS AND SERVICE
No user-serviceable parts are contained within the unit Contact your dealer or the factory if you require
part replacement or service
