Stevens CYCLOCROSS Скачать руководство пользователя страница 27

S - 

52

 | English

English | 

S - 

53  

 Danger:

Charge your battery only with the supplied charger. Do not use the charger 
of any other manufacturer, not even when the connector of the charger 
matches your rechargeable battery. The rechargeable battery can heat up, 
catch fire or even explode!

 Danger:

Rechargeable batteries which remain unused for a longer period of time 
must be stored in a dry and cool place. Keep them out of the reach of 
children! Check the state of charge after six months at the latest. Protect 
the contact areas of your rechargeable battery with the protective covers 
before storing the battery.

Rechargeable Battery

The range of a new, fully charged rechargeable battery is approx. 2,000 km 

(1,200 miles). When the battery is charged to approx. 25 % the range is limited to 
approx. 250 km (150 miles).

With a weak rechargeable battery the front derailleur stops working first and 

then the rear derailleur stops. When the rechargeable battery is empty, the rear 
derailleur remains in the last chosen gear. Shifting into another gear is no longer 
possible!

You can check the battery’s state of charge at any time. To do so press one of 

the control buttons and keep it in this position for half a second at least. The LED 
on the control unit indicates the state of charge:

•  green light lights up for about 2 seconds – rechargeable battery is charged 

100 %

•  green light flashes 5 times – rechargeable battery is charged approx. 50 %
•  red light lights up for about 2 seconds – rechargeable battery is charged 

approx. 25 %

•  red light flashes 5 times – rechargeable battery is empty

Over time, the capacity of the battery and thus the possible riding distance 

gradually decreases. This is unavoidable. When the realisable range no longer 
meets your requirements, you must replace the rechargeable battery.

Charging the Rechargeable Battery

The rechargeable battery in the seat tube must not be removed for charging.

The rechargeable battery is charged via USB charge port on the rear derailleur. 

The first service update is also made via this charge port.

 Note:

For more information 
see www.shimano.com

SRAM ETAP/AXS ROAD

With SRAM eTAP/AXS Road, you shift the gears on the rear derailleur by actu-

ating one of the buttons on each shift/brake lever. Whether the left or the right 
button shifts a lighter or heavier gear is freely configurable with the AXS Road.

With one of the buttons pressed, the gears on the rear derailleur continue to 

change until the button is released again. If both buttons are pressed at the same 
time, the front derailleur, if present, changes to the other chainring.

With the SRAM AXS app a wide range of individual settings can be made on 

the gear system.

If you want to charge your SRAM battery remove it from the rear or front derail-

leur. Charge the battery then with the charger supplied.

You find more information at www.sram.com

Содержание CYCLOCROSS
























































Отзывы: