manualshive.com logo in svg

Stevens CYCLOCROSS, Руководство пользователя

Поделиться
Скачать
Stevens CYCLOCROSS Скачать руководство пользователя страница 1

English | 

S - 

1  

STEVENS User Manual Road | Gravel | Cyclocross

 Caution:

Be sure to also observe the instructions of the component manufacturers on our website at 
www.stevensbikes.de/manual. These operating instructions are subject to European law. If the STEVENS 
bicycle is delivered to countries outside Europe, supplementary instructions may have to be provided by 
the manufacturer.

 Caution:

Read pages 6 to 19 before your first ride!
Perform the functional check on pages 20 and 21 before every ride!
Observe the service schedule, the bike card and the handover report!

 Note:

You find the instructions of the component manufacturers and the respective weblinks on our website at 
www.stevensbikes.de/manual

These operating instructions comply with the requirements of the EN ISO standard 4210-2 for road 

racing bicycles. There is a separate manual for STEVENS e-bikes that you can find on our website 
www.stevensbikes.de/manual

EN ISO 8098

STEVENS USER MANUAL 

ROAD 

| GRAVEL | CYCLOCROSS

ROAD RACING BICYCLES 

TRIATHLON / TIME TRIAL BICYCLES 

CYCLOCROSS BIKES 

GRAVEL BIKES
EN ISO 4210-2 CYCLES – SAFETY REQUIREMENTS FOR BICYCLES

For more information see the instructions on our website at www.stevensbikes.de

Содержание CYCLOCROSS
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды