Playmite 75
- Kit Inventory
☐
Laser-cut wood, 8 sheets (See
Sheet Wood Inventory,
page 5)
☐
Illustrated Build Instructions
☐
Plan Set, 2 sheets, 11 in. x 17 in.
☐
Wing pylon F18, center former, 1/16 in. ply
Taped to back of wood brick:
☐
1 Landing gear, wire, .032 in. x 12 in.
☐
2 Push rods, wire, .015 in. x 12 in.
Hardware Bag:
☐
1 Delrin receiver clip
☐
1 Pair 1 1/8 in. diameter plastic wheels (SIGSH450)
☐
1 Aluminum tube, 1/16 in. x 3/4 in.
☐
1 Heat shrink tube, 1 1/2 in. x 1/16 in.
☐
6 #16 Rubber bands
PlayMite -
Background
The
Playmite 75
is a pint-sized package, bursting at the seams with nostalgic charm. This compact
75 square-inch radio control model is designed to use ParkZone PKZ3352 ultra-micro electronics. The
Playmite 75
can be flown indoors, at the local gymnasium, or hop from thermal-to-thermal outdoors in
late evening lift.
There's something about these polyhedral/pylon ships of yesteryear that strikes a chord with old-timer
enthusiasts worldwide. Though there were hundreds of designs of the basic pylon model that circulated
through the budding model airplane industry, most enthusiasts seem to identify with the “Playboy” which
saw prolific distribution from manufacturer Cleveland Models.
The
Playmite 75
design was directly inspired by this iconic model, while reminiscent of those bygone
years, our kit offers a modern design that builds trouble-free and quickly, thanks to modern design
processes pioneered by Stevens AeroModel.
Build Instructions
Playmite 75
- Build Instructions © 2014 Stevens AeroModel, all rights reserved.
!
Page 3