Fuselage Construction
Main Fuselage Boom:
On a flat work
surface, align ply F1a on top of balsa F1b.
Ensure that the etching on both parts faces
up.
Bond with medium CA.
Align ply F1c on the other side of F1b. Bond
with medium CA.
Using guide slots in F1b, drill 1/8 in. hole for
wing mount.
Seal boom with at least 2 coats of Deft
lacquer or similar clear lacquer spray.
If desired, paint boom black at this time with
Design Master lacquer spray or Paint Marker.
Left Strut Assembly:
With etching on
hub F5 (L) facing DOWN, carefully fit
middle strut F3. Tack glue with thin CA.
eHopper
TM
© 2009 Stevens AeroModel all rights reserved.
Page 13 of 36
