Tail Feathers Cont.
Assemble rudder frame per plan.
Do not
install ply hinges or horn at this time.
Follow instruction on plan set to lightly sand
rudder in preparation for covering.
Do not
round off rudder horn mount area.
Cover rudder with AeroLITE or AeroFILM.
Open slots for hinges with hobby knife or
razor blade.
Fit ply hinge pieces R5 in slots.
Do not glue
at this time.
Remove covering from control horn mount at
base of rudder.
Fit control horn R6 to rudder. Note that short
arm of horn is marked “R” and extends on the
right side of rudder.
Ensure that control horn
is square and perpendicular to rudder.
Tack
with thin CA.
eHopper
TM
© 2009 Stevens AeroModel all rights reserved.
Page 11 of 36
