Stern 250200 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 20

Stern 250200 Скачать руководство пользователя страница 17

15

MAINTENANCE

Filter cleaning instructions

This faucet is provided with one / two stainless steel filter(s) preventing foreign particles

to enter the lines. If the water flow has decreased, this can be because the filter(s) is/are

clogged. The filter(s) can be cleaned as follows:
1. Shut-off the water shut off valve (angle valve).
2. Disconnect the flexible pipe/s.
3. Remove the filter(s) and wash it/them under running water.
4. Reassemble the parts.
5. Make sure that there is no water leakage.

Care and cleaning of chrome and special finishes

DO NOT

use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like.

Use of any prohibited cleaning or maintenance products or substances could damage

the surface of the faucet. For surface cleaning of faucet use ONLY soap and water, then

wipe dry with clean cloth or towel. When cleaning bathroom tile, the faucets should be

protected from any splattering of harsh cleansers.

«
...
15
16
17
18
19
...
»

Содержание 250200





















Отзывы:

Нет отзывов