9
SETTINGS ADJUSTMENT
DETECTION RANGE: The sensor range is the greatest distance that an
object can be away from the sensor to activate the faucet. The sensor is
factory preset.
To adjust the sensor range press + to increase detection range and – to
decrease the detection range of the sensor.
SECURITY TIME: The Security time, prevents continuous flushing of water
due to reflections or vandalism. By default, if the sensor is covered for
more than 90 seconds the water flow will shut automatically. To resume
regular operation any obstruction must be removed.
Press the SEC button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the security time and –
to reduce it.
DELAY IN TIME: It is recommended to change the delay in time for flush
valves for urinals or toilets only.
If required, the delay in time can be modified also in faucets as follows:
Press the IN button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay in time and –
to reduce it.
DELAY OUT TIME: This button allows modifying the water flow time after
the user removes his hands from the faucet. A delay out time close to
0 will save more water. An increased delay out time will make the user
experience more comfortable.
If required, the delay out time can be modified as follows:
Press the OUT button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay out time and
– to reduce it.