13
Reconnect the electronic unit’s
connector to the solenoid connector.
Place the body, and tighten the screw.
If your model is Swan 1000:
Reassemble the axis-assembly and tighten
the Allen screw. Reassemble the mixing
handle and tighten the Allen screw.
Turn on the shut off valve (angle valve).
Carefully place the battery inside the
body and reassemble the electronic
unit in its place. Be sure to insert the elec-
tronic unit all the way back into the opening
in the faucet’s body by pushing it moder-
ately into the o-ring.
Swing the sensor gently to align it with its
location. Be careful and make sure that you
do not tear the o-ring. If torn replace it with
a new one.
BATTERY REPLACEMENT
6
7
To replace the battery at Swan 1010 B \ Swan 1000 B models:
IMPORTANT: Spent batteries should not be disposed of with normal household waste.
Contact your local authority for information on waste disposal and recycling.
Carefully
open the
battery box.
1
Remove the
old battery.
2
Replace the
used battery
with a new
9V battery.
(Lithium battery
is recommended)
3
Close the
box.
4
SCREW
ELECTRONIC UNIT
O-RING