14
Battery replacement instructions – Nara 2032 / 2032 P
When the battery weakens, the red indicator light will blink at a constant
rate. The battery must be replaced within two weeks. Always use batteries
from a reputable source. Poor quality batteries may affect the performance
of the product.
To replace the battery:
1. Release the screw at the bottom of the cover plate and remove the cover
plate.
2. Carefully open the battery box.
3. Replace the used battery with a new 9V battery (Lithium battery is
recommended).
4. Close the battery box.
5. Refit the wall cover plate.
BATTERY REPLACEMENT
Check that there are no objects in
front of the sensor after the battery
replacement was completed.
After you have replaced the battery,
move away from the sensor range. Wait
30 seconds in order to allow the system
to set the ideal sensor range. Then after
the self adjustment has taken place the
solenoid valve will be opened and closed
for 1 second as an indication that the ideal
sensor range was set and the product is
ready for use.
Important:
Spent batteries should not be disposed of with
normal household waste. Contact your local authority for
information on waste disposal and recycling.
