3. Altering temperatures T1 (wash
temperature) and T2 (final rinse tem-
perature) in the DISINFECTION
VARIO 93°C-10 MIN cycle
CAUTION: The operator is respon-
sible for monitoring and guaran-
teeing the standard of disinfection
in the routine disinfection cycle.
Disinfection parameters should be
checked regularly using chemical
indicators, and contamination levels
checked and documented periodi-
cally using biological indicators.
The wash and final rinse temperatures
are set as standard at 113°F (45°C)
and 200°F (93°C), respectively. If a
wash temperature of 140°F (60°C) is re-
quired, this can be set in the following
manner:
Turn off the washer/disinfector.
Press DRAIN and DRYING touch
pads at the same time, while turning
on the machine. ”P1” appears in the
display field.
When DISINFECTION VARIO
93°C-10 MIN touch pad is pressed,
”30” appears in the display. Press
DRYING touch pad to change ”30”
to ”31” or vice versa.
When RINSE touch pad is pressed,
”40” appears in the display field. A
change from 40 to 41 would imply
that no thermal disinfection takes
place in the DISINFECTION VARIO
93°C–10 MIN cycle.
The following options are possible:
Setting
Main Wash
temperature
Rinse
temperature
30 / 40
113°F (45°C) 200°F (93°C)
30 / 41
113°F (45°C) 176°F (80°C)
31 / 40
140°F (60°C) 200°F (93°C)
31 / 41
140°F (60°C) 176°F (80°C)
Press START touch pad. “SP” ap-
pears in the display field.
Press START again. The change is
now stored and the display field
clears.
Programming special functions
39