Adding detergent
Priming the liquid dispensing
system
Before using the washer/disinfector for
the first time, or if the washer/disinfec-
tor has been operated with an empty
detergent container, the dispensing sys-
tem must be primed. Please proceed
as follows:
Press the ON/OFF button to turn the
washer/disinfector off.
Using a long, thin object (e.g.,
straightened paper clip), press in
switch ”B”, located on the left hand
end of the control panel, for 3-
1
/
2
minutes.
Each time the system is primed, any
detergent which runs into the wash
cabinet must be washed out by run-
ning the RINSE cycle.
After this cycle is run, the dispensing
system is filled and ready for use.
Adding detergent
31
